Discover information, advice, and prices for Rosco Flamex PC Flame Retardant sold for 102.75 $ , available in the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
The Roscoflamex PC Flame Retardant is a specially formulated solution designed to provide effective and durable fire protection for paper and cardboard materials This versatile product is ideal for treating a wide range of paper products commonly used in the construction of props and scenery including letters copier paper newspapers magazines paper trash packaging cardboard boxes and matte board This easytouse flame retardant has been premixed for your convenience and does not require any further dilution It can be applied through dipping brushing or spraying depending on your specific needs For optimal results multiple light treatments are recommended to minimize any potential discoloration or wrinkling as the paper materials dry One gallon of Roscoflamex PC Flame Retardant can treat approximately 400 square feet 37 square meters of material making it an efficient solution for your fire protection needs Its important to note that when using a spray application a substantial portion of the spray may not fall on the fabric so ensure an adequate amount of the Flamex is absorbed Roscoflamex PC Flame Retardant has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards reflecting its high safety and effectiveness For storage it is recommended to keep Flamex products in nonmetallic containers and thoroughly clean any metal sprayers used immediately after use Please read the instructions supplied with the Flamex product carefully Rosco offers these products in good faith but without guarantee as the materials treated and methods of application are beyond the control of the manufacturer Always test a sample to determine how the fabric will react and to test for effective flame retardance In conclusion the Roscoflamex PC Flame Retardant is a reliable safe and effective solution for protecting your paper and cardboard materials from fire providing you with peace of mind in your prop and scenery construction projects
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Rosco Flamex PC Flame Retardant sold for 475.75 $ , available in the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
If youre in the market for a reliable and effective flame retardant for paper and cardboard look no further than the Roscoflamex PC This product has been specifically formulated to treat a wide range of paper products frequently used in the construction of props and scenery Its ideal for treating paper items without a wax coating or other waterresistant properties ensuring a high level of fire protectionRoscoflamex PC comes premixed and doesnt require any further dilution making it a convenient and userfriendly solution The application method and the amount required for effective treatment may vary depending on the materials youre working with Its important to note that some discoloration and wrinkling may occur as the paper materials dry but this can be minimized with multiple light treatmentsOne gallon of Roscoflamex PC can treat approximately 400 square feet 37 square meters of material offering extensive coverage The product can be applied by dipping brushing or spraying For dipping immerse the material completely for ten minutes and then hang to dry If you prefer brushing use a wide layin brush and apply the solution in a crisscrossing pattern to ensure adequate absorption For spray application use a Hudsontype sprayer with a medium nozzle setting and spray in a back and forth pattern starting at the bottom and working your way up to the top of the materialRoscoflamex PC is approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards providing assurance of its effectiveness and safety For storage its recommended to keep Flamex products in nonmetallic containers and clean any metal sprayers thoroughly after useThis flame retardant solution is perfect for treating a variety of paper and cardboard items including letters copier paper newspapers magazines paper trash packaging cardboard boxes and matte board Please remember to always test a sample before full application to determine the products suitability and effectiveness With Roscoflamex PC you can confidently protect your paper and cardboard materials from fire ensuring safety and peace of mind
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Rosco Flamex DF Flame Retardant sold for 69.5 $ , available in the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
Be prepared and ensure the safety of your stage set or event with the Flamex DF Flame Retardant for Natural Fiber Fabrics This highquality flame retardant solution is specifically designed for natural fiber fabrics making it an essential tool for treating materials commonly used in scenery costumes and props The Flamex DF Flame Retardant is ideal for a wide range of natural fabrics including cotton muslin scrims cotton netting natural velours wools linens and natural felts Its also suitable for most decorative garment or upholstery fabrics made from natural fibers This versatility makes it a goto solution for professionals in the theater event and interior design industriesEasy to apply this flame retardant leaves no greasy residue ensuring your fabrics maintain their natural feel and appearance The Flamex DF Flame Retardant comes premixed eliminating the need for further dilution and making it ready to use right out of the container Application methods vary depending on the fabric but the most efficient method is immersion Simply submerge the fabric completely for ten minutes and hang to dry Alternatively you can brush the solution into the fibers using a wide layin brush in a crisscross pattern or spray it on with a mediumnozzle Hudsontype sprayer One gallon of Flamex DF Flame Retardant can treat approximately 500 square feet 464 square meters of fabric providing excellent coverage and value This product has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards providing peace of mind and assurance of its effectiveness When storing Flamex products its recommended to use nonmetallic containers and thoroughly clean metal sprayers immediately after use to maintain their condition Please note its essential to read the instructions supplied with the Flamex DF Flame Retardant carefully and always test a sample of your fabric to determine its reaction and effective flame retardance Choose Flamex DF Flame Retardant for Natural Fiber Fabrics for a reliable effective and easytouse solution to meet your fire safety needs
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Rosco Flamex WD Flame Retardant, priced at 102.75 $ : it belongs to the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
When it comes to enhancing the safety of your raw wood and cellulosic materials the Flamex WD Flame Retardant is an exceptional choice This product is specifically designed to render materials such as plywood board stock sheet goods hay acoustical tile and other common materials flame retardant Once the Flamex WD treatment has fully dried you can freely paint or stain your wood materials without compromising their flame retardance This flame retardant solution has been premixed for your convenience eliminating the need for further dilution The application method and the amount of Flamex WD required may vary depending on the materials youre treating A single gallon of Flamex WD can effectively treat approximately 150200 square feet 14185 square meters of material For optimal results you can apply Flamex WD by dipping brushing or spraying Dipping is the most efficient method requiring a full immersion for ten minutes followed by air drying Brushing involves using a wide layin brush to work the solution into the fibers of the material in a crisscross pattern Spraying requires a Hudsontype sprayer with a medium nozzle setting Regardless of the method its crucial to ensure adequate absorption and to apply a second treatment after the first has been absorbed Flamex WD has earned approval from the California and New York City Fire Marshall and has been tested according to ASTM E84 Class B standards For storage its recommended to keep Flamex products in nonmetallic containers and to clean metal sprayers thoroughly after use Please note that while Rosco offers Flamex WD in good faith its essential to read the instructions carefully and test the product before use to ensure its suitability for your intended application Flamex WD is comparable to the original W40 and should not be intermixed with old Flamex products This flame retardant solution is ideal for treating a wide range of materials including plywood luan pine boards hardwood homosote hay bales masonite and MDF Enhance the safety of your materials with the reliable and effective Flamex WD Flame Retardant
Condition: new
Disponibility: pre_order
Explore tips, opinions, and features on Rosco Flamex SF Flame Retardant sold at 102.75 $ ; this product is listed in the Other Camera Accessories category, produced by Rosco, and sold by Adorama.com.
Where safety and effectiveness meet youll find the Rosco Flamex SF Flame Retardant for Synthetic Fiber Fabrics This highquality easytouse solution is specifically engineered to treat a wide array of synthetic fabrics including polyesters nylons acrylics and rayons as well as most cottonsynthetic blends Unlike other flame retardants Rosco Flamex SF is designed to penetrate deeply bonding to the surface of the synthetic threads within the fabric weave This unique formulation ensures the flame retardant chemicals are securely attached providing durable and reliable flameresistant protection Ideal for use in scenery properties and costume construction Rosco Flamex SF is a trusted choice for professionals seeking to meet Fire Marshalls expectations It leaves no residue or powdery buildup maintaining the integrity of your fabrics while enhancing their safety Application of Rosco Flamex SF is straightforward and efficient It comes premixed and ready to use with no further dilution required It can be applied by dipping brushing or spraying depending on your specific needs One gallon of this effective flame retardant can treat approximately 500 square feet 464 square meters of fabric making it a costeffective solution for largescale projects Rosco Flamex SF has been rigorously tested and approved for use by the California and New York City Fire Marshall and meets NFPA 701 standards For storage its recommended to keep Flamex products in nonmetallic containers to maintain their effectiveness As with all Flamex products its important to read the instructions carefully and always test a sample for compatibility and effectiveness before treating the entire material With Rosco Flamex SF you can trust in a product that delivers superior flame retardant protection for your synthetic fiber fabrics
Condition: new
Disponibility: pre_order
Explore tips, opinions, and features on Rosco Flamex DF Flame Retardant sold at 102.75 $ ; this product is listed in the Other Camera Accessories category, produced by Rosco, and sold by Adorama.com.
Take your safety measures to the next level with the Flamex DF Flame Retardant specifically designed for delicate fabrics This product ideal for both scenery and costume materials ensures an effective flame resistance without compromising the softness or drape of your fabrics Roscoflamex DF a gentle yet powerful solution is compatible with most natural or synthetic fiber fabrics It has been meticulously premixed eliminating the need for any further dilution The application method and the quantity of Roscoflamex DF required may vary depending on the type of fabric being treated One gallon of this flame retardant can treat approximately 500 square feet 464 square meters of fabric There are several methods of application including dipping brushing and spraying Dipping is the most efficient method requiring the fabric to be completely immersed for ten minutes before being hung to dry Brushing involves using a wide layin brush to work the Flamex solution into the fabric fibers ensuring adequate absorption Spraying requires careful calculation of the solution needed as a significant portion may not fall on the fabric Roscoflamex DF has received approval from the California and New York City Fire Marshalls and has been tested according to NFPA 701 standards It is recommended to store Flamex products in nonmetallic containers and clean any metal sprayers immediately after use This flame retardant is ideal for treating a variety of delicate fabrics including sheers silks organza chiffon lace and gauze However it is always recommended to treat a test sample first to determine the fabrics reaction and to test for effective flame retardance Please note Roscoflamex DF is a new formulation designed to enhance performance on delicate and sensitive materials It is advised not to mix old and new Flamex products Always read the instructions supplied with any Flamex product carefully Rosco offers these products in good faith but without guarantee as the materials treated and methods of application are beyond the manufacturers control
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Rosco Flamex DF Flame Retardant, priced at 317.25 $ : it belongs to the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
Why settle for less when it comes to fire safety The Flamex DF Flame Retardant for Natural Fiber Fabrics a 5gallon 1895 liters solution is your trusted ally in ensuring your scenery props and costumes meet local fire regulations This product is specifically designed for fabrics made of natural fibers making it an ideal choice for treating cotton muslin scrims cotton netting natural velours wools linens natural felts and a wide range of decorative garment or upholstery fabricsThe Flamex DF Flame Retardant is a product of Rosco a trusted name in the industry Its premixed and ready to use eliminating the need for further dilution The application method and the amount required may vary depending on the fabric but rest assured this solution is easy to use and leaves no greasy residueOne gallon of this flame retardant can treat approximately 500 square feet 464 square meters of fabric It can be applied through dipping brushing or spraying For dipping immerse the fabric completely for ten minutes and hang to dry If you prefer brushing use a wide layin brush and apply in a crisscross pattern to ensure adequate absorption For spraying use a Hudsontype sprayer with a medium nozzle setting spraying in a back and forth pattern from the bottom to the top of the fabricThe Flamex DF Flame Retardant has been approved by the California and New York City Fire Marshall and has been tested according to NFPA 701 standards For storage its recommended to keep Flamex products in nonmetallic containers and clean any metal sprayers used immediately after usePlease remember to always read the instructions supplied with any Flamex product and test a sample before using to determine how the fabric will react and to ensure effective flame retardance The Flamex DF Flame Retardant is comparable to the original Roscoflamex C26 but its advised not to intermix old and new Flamex products Choose Flamex DF Flame Retardant for Natural Fiber Fabrics your reliable solution for fire safety
Condition: new
Disponibility: pre_order
Explore tips, opinions, and features on Rosco Flamex DF Flame Retardant sold at 475.75 $ ; this product is listed in the Other Camera Accessories category, produced by Rosco, and sold by Adorama.com.
Because safety is paramount in any setting the Flamex DF Flame Retardant for Delicate Fabrics a 5gallon 1895 liters solution is expertly designed to provide effective flame resistance without compromising the softness and drape of your delicate materials This product is ideal for treating fabrics used in scenery and costumes which often present a challenge due to their delicate nature Roscoflamex DF the key ingredient in this solution ensures the preservation of the fabrics soft qualities while delivering a robust flame treatment This flame retardant solution is compatible with most natural or synthetic fiber fabrics making it a versatile choice for a wide range of applicationsThe Flamex DF Flame Retardant comes premixed eliminating the need for further dilution However the application method and the amount required for effective treatment may vary depending on the fabric in use One gallon of this flame retardant solution can treat approximately 500 square feet 464 square meters of fabric The product can be applied by dipping brushing or spraying Dipping is the most efficient method requiring a tenminute immersion followed by air drying Brushing involves using a wide layin brush to ensure adequate absorption into the fabric fibers For spray application a Hudsontype sprayer with a medium nozzle setting is recommended to ensure optimal coverageRoscoflamex DF has earned approval from the California and New York City Fire Marshall and has been tested according to NFPA 701 standards For storage it is recommended to keep Flamex products in nonmetallic containers and clean any metal sprayers immediately after useThis flame retardant solution is ideal for treating a variety of delicate fabrics including sheers silks organza chiffon lace and gauze However it is always recommended to treat a test sample first to determine the fabrics reaction and to test for effective flame retardance Please note Roscoflamex DF is a new formulation designed to enhance performance on delicate and sensitive materials It is advised not to intermix old and new Flamex products Always read the instructions supplied with any Flamex product carefully before use
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Rosco Flamex SF Flame Retardant sold for 475.75 $ , available in the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
Experience the superior protection of the Flamex SF Flame Retardant expertly engineered by Rosco for synthetic fiber fabrics This product is specifically designed to overcome the challenges of treating synthetic fabrics which do not absorb liquids in the same way as natural fibers Flamex SF is a penetrating treatment that forms a secure bond with the surface of the threads reaching deep within the weave of the material This ensures that the flame retardant chemicals are firmly embedded providing an effective and durable protective treatment This versatile flame retardant is suitable for a wide array of synthetic fabrics including polyesters nylons acrylics and rayons as well as most cottonsynthetic blends Its an ideal choice for a broad spectrum of scenery properties and costume construction However we always recommend testing a sample first to ensure compatibility and effectiveness Flamex SF leaves no residue or powdery buildup simplifying the task of ensuring your soft goods and scenic fabrics meet the stringent expectations of Fire Marshalls It comes premixed and does not require any further dilution Application methods vary depending on the fabric in use but Flamex SF can be applied by dipping brushing or spraying One gallon of Flamex SF can treat approximately 500 square feet 464 square meters of fabric Flamex SF has been approved for use by the California and New York City Fire Marshalls and has been tested according to NFPA 701 standards For storage we recommend nonmetallic containers to maintain the products integrity Please read the instructions supplied with Flamex SF carefully Rosco offers this product in good faith but without guarantee as the materials treated and methods of application are beyond the control of the manufacturer Always test before using to determine the suitability of Flamex SF for your intended use Experience the peace of mind that comes with using Flamex SF Flame Retardant the trusted choice for synthetic fiber fabric protection
Condition: new
Disponibility: pre_order
Explore tips, opinions, and features on Rosco Flamex PA Flame Retardant sold at 22.5 $ ; this product is listed in the Other Camera Accessories category, produced by Rosco, and sold by Adorama.com.
If youre seeking a reliable solution to enhance the fire safety of your painted surfaces Roscoflamex PA Flame Retardant Paint Additive is an essential product for your safety arsenal This 8oz 236 ml jar of clear unpigmented additive is expertly formulated to integrate seamlessly with a US gallon 379L of waterbased paint transforming it into a flameretardant coating without compromising the original color or finish of your paintRoscoflamex PA is meticulously designed to be compatible with most latex or vinyl acrylic paints ensuring a wide range of applications However its important to conduct a compatibility test with your specific paint selection to guarantee optimal results Its worth noting that this additive should not be used with metallic paints as the metal pigments may adversely react leading to tarnishing or corrosionThe application of Roscoflamex PA does not alter the inherent flammability of the substrate itself but rather adds a protective layer that effectively slows the propagation of fire across the treated surface For best results the additive should be thoroughly mixed into a single US gallon 379L of paint and the resulting mixture can be diluted to your preference However it is crucial to maintain a dry paint film thickness of no less than 4 mil to ensure the efficacy of the fire retardant barrierWhen using Roscoflamex PA with Rosco Supersaturated paint the process requires adding one 8 oz jar to one quart of undiluted Supersaturated paint followed by dilution of at least 11 with water A thorough mix is necessary before applicationOnce treated with Roscoflamex PA your paint can cover approximately 300 square feet 28 square meters per gallon adhering to the paint manufacturers coverage guidelines The treated paint can be applied using a brush roller or sprayer following the paint manufacturers instructions emphasizing the importance of achieving a complete and adequately thick paint film for effective fire retardationRoscoflamex PA has earned the approval of the California and New York City Fire Marshals and meets the rigorous standards of ASTM E84 Class A testing For storage it is recommended to use nonmetallic containers and to clean metal sprayers immediately after use to prevent any reactionAs with all safety products it is crucial to read and understand the instructions provided with Roscoflamex PA Rosco offers this product with the intent of enhancing fire safety but the effectiveness is contingent upon proper application and treatment of materials Users should verify the suitability of Roscoflamex PA for their intended use and always conduct a preuse test This product is comparable to the original P50 formulation but it is advised not to mix old and new Flamex productsRoscoflamex PA is suitable for a variety of waterbased paints including latex house paints tinted latex paints latex primers Rosco Scenic paints clear flat or gloss acrylic glazes and vinyl
Condition: new
Disponibility: pre_order
EAN: 0192223109346
Find tips, reviews, and features on Rosco Flamex PA Flame Retardant sold for 1562.25 $ , available in the Other Camera Accessories category; this product belongs to Rosco and is sold by Adorama.com.
Roscoflamex PA is a clear unpigmented additive for creating a flame retardant paint layer Add one full jar of Roscoflamex PA to a US gallon 379L of water based paint to make your paint coating flame retardant Roscoflamex PA is compatible in most latex or vinyl acrylic paints but always test with your specific paint choice Do not use Roscoflamex PA with metallic paints as the metal pigments may react and tarnish or corrode Roscoflamex PA does NOT alter the flammability of the substrate being painted but only adds a retardant treatment that slows the spread of fire along the surface Using Roscoflamex PA Roscoflamex PA has been premeasured and should be added to a single US Gallon 379L of paint Once combined the paintFlamex mixture can be diluted as desired but the dry paint film must be no less than 4 mil in thickness The effectiveness of a fire retardant barrier is dependent on both the fire retardant additive and the thickness of the coating Roscoflamex PA is not intended to be used in place of other Roscoflamex products Where possible always treat the substrate material using the appropriate Roscoflamex product Note When using Roscoflamex PA in Rosco Supersaturated paint add one 8 oz jar to one quart of undiluted Supersaturated and then dilute this mixture at least 11 with water Mix thoroughly before using Coverage 8 oz of Roscoflamex PA mixed into one gallon of paint will treat approximately 300 square feet 28 square meters of material as per paint manufacturers guidelines Applying Roscoflamex PA Apply treated paint by brush roller or sprayer as per the paint manufacturers instructions Regardless of the method of application it is vital that a complete paint film is formed and that the dry film thickness of the finished coating is not less than 4 mil Paint films that are incomplete or are too thin will not provide a barrier against the spread of fire Certification and Testing Roscoflamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class A Storage Store Flamex products in nonmetallic containers When metal sprayers are used they should be thoroughly cleaned immediately after use including nozzles and accessories Avoid use of metal buckets or paint containers when possible Disclaimer Read carefully the instructions supplied with any Flamex product Rosco offers these products in good faith but without guarantee of any type since materials treated and methods of application are beyond the control of the manufacturer You should determine suitability of the Flamex product for the intended use and always test before using Roscoflamex PA compares to original P50 Do not intermix old and new Flamex products Use to treat Latex house paint Tinted latex paints Latex primers Rosco Scenic paints Clear Flat or Gloss Acrylic Glazes Vinyl and Acrylic water
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Rosco Flamex PA Flame Retardant sold for 270 $ , available in the Other Camera Accessories category; this product is sold by Adorama.com and made by Rosco.
You can enhance the fire resistance of your paint with the Roscoflamex PA Flame Retardant Paint Additive a clear unpigmented solution designed to create a flameretardant layer on your painted surfaces This versatile easytouse additive is compatible with most latex or vinyl acrylic paints making it a valuable addition to your painting suppliesTo use simply add one full jar of Roscoflamex PA to a US gallon 379L of waterbased paint This highquality additive does not alter the flammability of the substrate being painted but instead adds a retardant treatment that slows the spread of fire along the surface Please note its not recommended for use with metallic paints due to potential reactions with metal pigmentsThe effectiveness of this flameresistant barrier is dependent on both the fire retardant additive and the thickness of the coating Ensure the dry paint film is no less than 4 mil in thickness for optimal performance While Roscoflamex PA is a robust solution it is not intended to replace other Roscoflamex products Always treat the substrate material using the appropriate Roscoflamex product for the best resultsWhen using Roscoflamex PA in Rosco Supersaturated paint add one 8 oz jar to one quart of undiluted Supersaturated and then dilute this mixture at least 11 with water Mix thoroughly before using An 8 oz jar of Roscoflamex PA mixed into one gallon of paint will treat approximately 300 square feet 28 square meters of material as per paint manufacturers guidelinesApply the treated paint by brush roller or sprayer as per the paint manufacturers instructions ensuring a complete paint film is formed Roscoflamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class AStore Flamex products in nonmetallic containers and clean metal sprayers thoroughly after use Always read the instructions supplied with any Flamex product and test before using Roscoflamex PA is comparable to the original P50 Do not intermix old and new Flamex products Suitable for treating latex house paint tinted latex paints latex primers Rosco Scenic paints clear flat or gloss acrylic glazes and vinyl and acrylic waterbased mural paints
Condition: new
Disponibility: pre_order
Find tips, reviews, and features on Rosco Flamex WD Flame Retardant sold for 475.75 $ , available in the Other Camera Accessories category; this product belongs to Rosco and is sold by Adorama.com.
Take your fire safety measures to the next level with the Rosco Flamex WD Flame Retardant for Raw Wood This versatile and easytouse solution is specifically designed to treat a wide range of wood and cellulosic materials including plywood board stock sheet goods hay acoustical tile and more With the Rosco Flamex WD you can effectively render these common materials flame retardant enhancing the safety of your space Once the treatment has fully dried you can freely paint or stain the wood materials without compromising the flame retardance offering you both safety and aesthetic flexibility This durable flame retardant solution comes premixed and requires no further dilution simplifying your fire prevention efforts The application method and the amount of Flamex WD required may vary depending on the materials youre treating One gallon of this effective flame retardant can treat approximately 150200 square feet 14185 square meters of material You can apply it by dipping brushing or spraying depending on your needs For optimal flame retardance ensure adequate absorption and consider a second treatment Rosco Flamex WD has earned the approval of both the California and New York City Fire Marshalls and has been tested according to ASTM E84 Class B standards attesting to its effectiveness and reliability For storage keep Flamex products in nonmetallic containers and clean any metal sprayers thoroughly after use Always read the instructions carefully and test the product before using it Whether youre treating plywood luan pine boards hardwood homosote hay bales masonite or MDF the Rosco Flamex WD Flame Retardant for Raw Wood offers a trusted and efficient solution for enhancing fire safety
Condition: new
Disponibility: pre_order
Discover information, advice, and prices for Sierra Shields 5 8 Flame sold for 73.94 $ , available in the Boats Parts & Accessories category; this product is sold by Overtons.com and made by Sierra.
Flameretardant polypropylene conduit is black with a blue stripe It provides chafing protection for wiring systems and is split longitudinally for easy access to harness It has a maximum temperature range of 275F Meets ABYC standard 81519 and UL 94 V2 Sierra Part 1161280587B Provides chafing protection for wiring systems Maximum temperature range of 275F Shields 58 FlameRetardant Conduit 100L in Blue
Condition: new
Disponibility: in_stock
Shipping: 9.95
EAN: 0808282110147
Discover information, advice, and prices for Sierra Shields 3 8 Flame, priced at 59.94 $ : it belongs to the Boats Parts & Accessories category; this product is sold by Overtons.com and made by Sierra.
Flameretardant polypropylene conduit is black with a blue stripe It provides chafing protection for wiring systems and is split longitudinally for easy access to harness It has a maximum temperature range of 275F Meets ABYC standard 81519 and UL 94 V2 Sierra Part 1161280387B Provides chafing protection for wiring systems Maximum temperature range of 275F Shields 38 FlameRetardant Conduit 100L in Blue
Condition: new
Disponibility: in_stock
Shipping: 9.95
EAN: 0808282110123
Explore tips, opinions, and features on VEVOR Welding Blanket 2 Packs sold at 33.99 $ ; this product is listed in the Outdoor Equipment category, produced by VEVOR, and sold by Vevor.com.
VEVOR Welding Blanket 2 Packs 4FT x 6FT Heat Treated Welding Blanket Up To 998F Heat Resistant Blanket Set HeavyDuty Fiberglass Flame Retardant Insulation Welding Mat Cover with Metal GrommetsCostEffectiveHigh QualityEasy SetupSoft and LightweightComprehensive ProtectionFlameRetardant Welding ProtectionNumber of Pieces 2 PackColor GoldItem Model Number XU2305Temperature Resistance 998 537Material FiberglassNet Weight 970 lbs 44 kg
Condition: new
Disponibility: in_stock
Delivery Time: 2~5 days
EAN: 0197988630814
Find tips, reviews, and features on Sierra Shields 1 Flame Retardant sold for 95.94 $ , available in the Boats Parts & Accessories category; this product belongs to Sierra and is sold by Overtons.com.
Flameretardant polypropylene conduit is black with a blue stripe It provides chafing protection for wiring systems and is split longitudinally for easy access to harness It has a maximum temperature range of 275F Meets ABYC standard 81519 and UL 94 V2 Sierra Part 1161281007B Provides chafing protection for wiring systems Maximum temperature range of 275F Shields 1 FlameRetardant Conduit 100L in Blue
Condition: new
Disponibility: in_stock
Shipping: 9.95
EAN: 0808282110161
Find tips, reviews, and features on Sierra Shields 5 8 Flame sold for 45.94 $ , available in the Boats Parts & Accessories category; this product belongs to Sierra and is sold by Overtons.com.
Flameretardant polypropylene conduit is black with a blue stripe It provides chafing protection for wiring systems and is split longitudinally for easy access to harness It has a maximum temperature range of 275F Meets ABYC standard 81519 and UL 94 V2 Provides chafing protection for wiring systems Maximum temperature range of 275F Shields 58 FlameRetardant SplitWire Conduit in Blue
Condition: new
Disponibility: in_stock
Shipping: 9.95
EAN: 0808282110130
Find tips, reviews, and features on Sierra Shields 1 2 Flame sold for 102.94 $ , available in the Boats Parts & Accessories category; this product belongs to Sierra and is sold by Overtons.com.
Flameretardant polypropylene conduit is black with a blue stripe It provides chafing protection for wiring systems and is split longitudinally for easy access to harness It has a maximum temperature range of 275F Meets ABYC standard 81519 and UL 94 V2 Sierra Part 1161281126B Provides chafing protection for wiring systems Maximum temperature range of 275F Shields 112 FlameRetardant Conduit 50L in Blue
Condition: new
Disponibility: in_stock
Shipping: 9.95
EAN: 0808282110178
Find tips, reviews, and features on Sierra Shields 1 2 Flame sold for 66.94 $ , available in the Boats Parts & Accessories category; this product belongs to Sierra and is sold by Overtons.com.
Flameretardant polypropylene conduit is black with a blue stripe It provides chafing protection for wiring systems and is split longitudinally for easy access to harness It has a maximum temperature range of 275F Meets ABYC standard 81519 and UL 94 V2 Sierra Part 1161280127B Provides chafing protection for wiring systems Maximum temperature range of 275F Shields 12 FlameRetardant Conduit 100L in Blue
Condition: new
Disponibility: in_stock
Shipping: 9.95
EAN: 0808282110253
